Dreambox® special electrode-holder / probe-holder / GHL sensor-holder / Balling® system

Dreambox^® special electrode holder d-1000-30
Use as/for: Probe-holder / GHL Sensor-holder / Balling^® system / Dosing-System-holder

Suitable for all Nano Dreamboxes and Dreamboxes or other applications

• high quality rigid PVC
• CNC milled
• for all Nano Dreamboxes / Dreamboxes (at the first Dreambox^® prepared)
• height-adjustable guide rod can be fixed with polished titanium screw

Two versions available: one with 5 x 12mm holes and titanium screws and one without holes.

All up to date delivered Dreamboxes have a special milled groove in the pump-chamber, on the inside of the Dreambox^®. This is used for add and fixation of a base plate, which takes a 20mm Plexiglass baton. About this drilling hole, you can generate different applications. (Version with holes: electrode holder with 5 holes dm 12.5 mm. The electrodes are fixed with polished M6 titanium screws.)

The lower electrode holder is available also unbored. So the user can make holes are according to own even, if the 12, 5 mm hole cuts are not suitable, for example, if you want to fix instead of electrodes, tubes for dosing pumps.

The baseplate can be fixed with Tangit or Cyanacrylat-(Superglue). All Dreamboxes exist in the same place, slots for the electrode cable. The deeper Dreamboxes have additionally a 30mm hole, where should fit all standard electrodes.